P0A46 — Drive motor B position sensor signal out of range
| Meaning | The control unit receives a signal from motor B's position sensor that is present but does not match what the motor is doing, or is outside the expected range. So the sensor is not necessarily dead: it is giving an unreliable reading. The system may reduce power to avoid driving the motor incorrectly. |
| Family | Powertrain (P) |
Typical symptoms
Weak or uneven acceleration
Vibration or electrical noise from the motor
Limp mode
Unusual high-voltage battery consumption
Common causes
Wiring or connector with abnormal resistance
Deteriorated sensor (resolver)
Electrical noise from damaged shielding
Fault in the inverter
What to do
How to read code P0A46
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A46 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (46) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A46 mean?
Drive motor B position sensor signal out of range. The control unit receives a signal from motor B's position sensor that is present but does not match what the motor is doing, or is outside the expected range. So the sensor is not necessarily dead: it is giving an unreliable reading. The system may reduce power to avoid driving the motor incorrectly.
Can I keep driving with code P0A46 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A46
Position sensor badly fitted or with play Wiring or connector with abnormal resistance Deteriorated sensor (resolver) Electrical noise from damaged shielding Fault in the inverter
How do you fix code P0A46?
Have the car checked at a shop that can read and interpret electric motor data. The technician will check wiring and connectors first, then the sensor. If power is heavily reduced, drive carefully and only to reach the shop.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A45 — Drive motor B position sensor circuit fault
- Next code: P0A47 — Drive motor B position sensor signal too low
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem