Skip to content
Fault code dictionary (DTC)

P0A6A — Drive Motor Inverter A, Current Too High

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe powertrain control module has detected that the electrical current flowing through the inverter for drive motor A has exceeded safe operating limits. This component manages the high-voltage power between the hybrid battery and the electric drive motor. When this error occurs, the vehicle usually shuts down the hybrid system to prevent severe electrical damage.
FamilyPowertrain (P)

Typical symptoms

The vehicle fails to start or goes into a safety shutdown mode
Hybrid system warning light appears on the dashboard
Loss of electric propulsion

Common causes

Internal failure within the hybrid inverter assembly
Short circuit in the wiring harness between the inverter and the electric motor
Cooling system failure causing the inverter to overheat and register high current spikes
Internal fault in the electric drive motor windings

What to do

This is a high-voltage electrical fault that requires immediate professional diagnosis with specialized diagnostic equipment. Do not attempt to inspect or touch high-voltage orange cables, as it poses a serious safety hazard.

How to read code P0A6A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A6A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (6A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A6A mean?

Drive Motor Inverter A, Current Too High. The powertrain control module has detected that the electrical current flowing through the inverter for drive motor A has exceeded safe operating limits. This component manages the high-voltage power between the hybrid battery and the electric drive motor. When this error occurs, the vehicle usually shuts down the hybrid system to prevent severe electrical damage.

Can I keep driving with code P0A6A active?

With caution: limp mode possible, have it checked soon

Common causes — P0A6A

Internal failure within the hybrid inverter assembly Short circuit in the wiring harness between the inverter and the electric motor Cooling system failure causing the inverter to overheat and register high current spikes Internal fault in the electric drive motor windings

How do you fix code P0A6A?

This is a high-voltage electrical fault that requires immediate professional diagnosis with specialized diagnostic equipment. Do not attempt to inspect or touch high-voltage orange cables, as it poses a serious safety hazard.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes