Skip to content
Fault code dictionary (DTC)

P0A71 — Inverter Electronics Coolant Temperature Sensor A Circuit Range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected an implausible signal from the temperature sensor that monitors the cooling system of the hybrid inverter. This means the computer cannot accurately read how hot the inverter electronics are running.
FamilyPowertrain (P)

Typical symptoms

The hybrid system warning light is on
The vehicle may limit power or switch to a safe operating mode

Common causes

Faulty temperature sensor inside or near the inverter
Wiring damage or loose electrical connector at the sensor
Low coolant level in the hybrid cooling circuit

What to do

Check the coolant level in the dedicated hybrid reservoir first and inspect the wiring harness leading to the inverter. Have a technician diagnose the sensor signal before driving long distances to prevent potential overheating of the hybrid electronics.

How to read code P0A71

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A71 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (71) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A71 mean?

Inverter Electronics Coolant Temperature Sensor A Circuit Range. The control unit has detected an implausible signal from the temperature sensor that monitors the cooling system of the hybrid inverter. This means the computer cannot accurately read how hot the inverter electronics are running.

Can I keep driving with code P0A71 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A71

Faulty temperature sensor inside or near the inverter Wiring damage or loose electrical connector at the sensor Low coolant level in the hybrid cooling circuit

How do you fix code P0A71?

Check the coolant level in the dedicated hybrid reservoir first and inspect the wiring harness leading to the inverter. Have a technician diagnose the sensor signal before driving long distances to prevent potential overheating of the hybrid electronics.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes