P0A76 — Inverter/Converter Coolant Pump Control Circuit Low
| Meaning | The engine computer has detected an electrical voltage that is too low in the control circuit for the cooling pump that protects the hybrid inverter. This means the pump might not be running properly, which can cause the inverter to overheat and trigger a safety shutdown. |
| Family | Powertrain (P) |
Typical symptoms
The car may enter a low-power safety mode
The electric drive system might temporarily shut down
Common causes
Damaged wiring or loose electrical connector at the pump
Blown fuse related to the cooling system
Internal failure in the hybrid control module
What to do
How to read code P0A76
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A76 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (76) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A76 mean?
Inverter/Converter Coolant Pump Control Circuit Low. The engine computer has detected an electrical voltage that is too low in the control circuit for the cooling pump that protects the hybrid inverter. This means the pump might not be running properly, which can cause the inverter to overheat and trigger a safety shutdown.
Can I keep driving with code P0A76 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A76
Faulty inverter coolant pump Damaged wiring or loose electrical connector at the pump Blown fuse related to the cooling system Internal failure in the hybrid control module
How do you fix code P0A76?
Have a technician check the fuses, wiring, and the pump itself as soon as possible. Driving with an overheating inverter can lead to major electrical damage.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A75 — Drive Motor A Inverter Performance
- Next code: P0A77 — Generator Inverter Performance
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem