P0A79 — Inverter Generator Inverter System Performance
| Meaning | The hybrid control computer has detected an issue with the performance of the generator inverter module. This means the electronics responsible for converting and managing power between the high-voltage battery and the generator are not operating within expected parameters. |
| Family | Powertrain (P) |
Typical symptoms
The vehicle may enter a limp mode with reduced power
The engine or hybrid system may shut down while driving
Common causes
Internal electrical fault within the generator inverter assembly
Corrosion or loose connections on the high-voltage wiring or control harness
What to do
How to read code P0A79
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A79 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (79) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A79 mean?
Inverter Generator Inverter System Performance. The hybrid control computer has detected an issue with the performance of the generator inverter module. This means the electronics responsible for converting and managing power between the high-voltage battery and the generator are not operating within expected parameters.
Can I keep driving with code P0A79 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A79
Cooling system failure leading to inverter overheating Internal electrical fault within the generator inverter assembly Corrosion or loose connections on the high-voltage wiring or control harness
How do you fix code P0A79?
Have a technician inspect the hybrid inverter cooling system and check for active electrical faults as soon as possible. Because this involves high-voltage components, avoid driving the vehicle if it enters a restricted power mode or shuts down unexpectedly.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A78 — Inverter Generator Inverter Circuit Range and Perf...
- Next code: P0A7A — Generator Inverter Module Performance
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem