Skip to content
Fault code dictionary (DTC)

P0A82 — Battery cooling fan 1 performance / stuck off

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit commands battery fan 1 but does not see the expected response: the fan is not turning or is too weak. Battery cooling may therefore be insufficient.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Hot battery after prolonged use
Reduced power under load
Fan silent even when the battery is hot
Slower charging

Common causes

Fan blocked by dust, dirt or foreign objects
Worn fan motor
Blocked air duct
Power supply or ground problem
Incorrect fan feedback signal

What to do

Check that the fan and its ducts are clean and clear, and that the fan starts when commanded. Do not put it off for long: without cooling the battery ages faster.

How to read code P0A82

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A82 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (82) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A82 mean?

Battery cooling fan 1 performance / stuck off. The control unit commands battery fan 1 but does not see the expected response: the fan is not turning or is too weak. Battery cooling may therefore be insufficient.

Can I keep driving with code P0A82 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A82

Fan blocked by dust, dirt or foreign objects Worn fan motor Blocked air duct Power supply or ground problem Incorrect fan feedback signal

How do you fix code P0A82?

Check that the fan and its ducts are clean and clear, and that the fan starts when commanded. Do not put it off for long: without cooling the battery ages faster.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes