Skip to content
Fault code dictionary (DTC)

P0A8A — 14 V converter current sensor A circuit intermittent

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe signal from current sensor A of the 14-volt converter comes and goes. The control unit loses it at times, so the fault may not be present when diagnosis is carried out.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on and off
Irregular behaviour of the 12-volt system
Fault messages that appear and disappear
Problems more frequent with vibration or moisture
12-volt battery sometimes going flat

Common causes

Loose connector or corroded contacts
Harness with a partly broken wire
Current sensor failing at times
Moisture in the connector
14 V converter with an intermittent internal fault

What to do

Gently move the wiring and connectors while the diagnostic tool reads the signal, to find the point that interrupts it. An intermittent fault tends to get worse over time.

How to read code P0A8A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A8A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (8A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A8A mean?

14 V converter current sensor A circuit intermittent. The signal from current sensor A of the 14-volt converter comes and goes. The control unit loses it at times, so the fault may not be present when diagnosis is carried out.

Can I keep driving with code P0A8A active?

With caution: limp mode possible, have it checked soon

Common causes — P0A8A

Loose connector or corroded contacts Harness with a partly broken wire Current sensor failing at times Moisture in the connector 14 V converter with an intermittent internal fault

How do you fix code P0A8A?

Gently move the wiring and connectors while the diagnostic tool reads the signal, to find the point that interrupts it. An intermittent fault tends to get worse over time.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes