P0A91 — Drive motor B performance
| Meaning | The control unit detected that electric drive motor B is not responding as expected to the requested torque. The code reports the result, not the cause: it may come from the motor, the inverter, sensors or wiring. Which motor is B depends on the model. |
| Family | Powertrain (P) |
Typical symptoms
Hybrid or EV system warning light on
Vibration or abnormal noise when accelerating
Uneven acceleration
Hybrid system behaving differently from usual
Common causes
Fault in the inverter
High-voltage wiring or connector problems
Electric motor with damaged windings or bearings
Insufficient cooling of the motor or inverter
High-voltage battery voltage outside correct values
What to do
How to read code P0A91
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A91 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (91) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A91 mean?
Drive motor B performance. The control unit detected that electric drive motor B is not responding as expected to the requested torque. The code reports the result, not the cause: it may come from the motor, the inverter, sensors or wiring. Which motor is B depends on the model.
Can I keep driving with code P0A91 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A91
Motor position sensor (resolver) giving a wrong signal Fault in the inverter High-voltage wiring or connector problems Electric motor with damaged windings or bearings Insufficient cooling of the motor or inverter High-voltage battery voltage outside correct values
How do you fix code P0A91?
If power is limited, drive carefully and only to reach a workshop. Have the motor, inverter and sensor data read: high voltage requires qualified staff, so do not touch the orange cables.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A90 — Drive motor A performance
- Next code: P0A92 — Hybrid generator performance out of range
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem