Skip to content
Fault code dictionary (DTC)

P0A93 — Inverter A cooling system not performing properly

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that the cooling circuit of inverter A is not removing heat as it should. The inverter is the unit that converts high-voltage battery power to run the electric motors, and it gets very hot. If the heat is not carried away, the system cuts power to protect itself.
FamilyPowertrain (P)

Typical symptoms

Hybrid system warning light or temperature warning light on
Reduced power, especially uphill or under load
Car going into limp mode
Cooling fan very loud or running all the time
Overheating message on the dashboard
The combustion engine works more than usual

Common causes

Low coolant level in the inverter cooling circuit
Weak or stopped electric coolant pump
Air in the circuit after maintenance or a leak
Radiator or hoses partly blocked or leaking
Inverter temperature sensor giving a wrong reading
An internal fault in the inverter

What to do

With the engine off and cold, check the level of the coolant in the inverter's own circuit, which is often separate from the engine's. If the level is low or the warning stays on, do not keep driving: overheating can damage the inverter. Have the system checked at a workshop as soon as possible.

How to read code P0A93

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A93 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (93) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A93 mean?

Inverter A cooling system not performing properly. The control unit has detected that the cooling circuit of inverter A is not removing heat as it should. The inverter is the unit that converts high-voltage battery power to run the electric motors, and it gets very hot. If the heat is not carried away, the system cuts power to protect itself.

Can I keep driving with code P0A93 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A93

Low coolant level in the inverter cooling circuit Weak or stopped electric coolant pump Air in the circuit after maintenance or a leak Radiator or hoses partly blocked or leaking Inverter temperature sensor giving a wrong reading An internal fault in the inverter

How do you fix code P0A93?

With the engine off and cold, check the level of the coolant in the inverter's own circuit, which is often separate from the engine's. If the level is low or the warning stays on, do not keep driving: overheating can damage the inverter. Have the system checked at a workshop as soon as possible.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes