P0AC5 — Hybrid/EV battery temperature sensor B circuit fault
| Meaning | The control unit has detected a problem in the circuit of temperature sensor B of the high-voltage battery pack. The code points to a general circuit fault and does not say whether the signal is low, high or unstable. Battery temperature matters for safety and cell life, so the system may limit power. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Battery cooling fan constantly loud or not running
Slowed or interrupted charging
Hybrid/EV system fault message
Common causes
Faulty temperature sensor
Fault in the battery management control unit
Moisture or corrosion in the battery assembly
Fault in the battery cooling circuit skewing the reading
What to do
How to read code P0AC5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0AC5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (C5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0AC5 mean?
Hybrid/EV battery temperature sensor B circuit fault. The control unit has detected a problem in the circuit of temperature sensor B of the high-voltage battery pack. The code points to a general circuit fault and does not say whether the signal is low, high or unstable. Battery temperature matters for safety and cell life, so the system may limit power.
Can I keep driving with code P0AC5 active?
With caution: limp mode possible, have it checked soon
Common causes — P0AC5
Damaged or corroded temperature sensor connector or wiring Faulty temperature sensor Fault in the battery management control unit Moisture or corrosion in the battery assembly Fault in the battery cooling circuit skewing the reading
How do you fix code P0AC5?
Do not open or touch the battery pack or the orange cables: a certified shop is needed. First the temperatures of all sensors are read and compared with each other, then connectors and wiring are checked. If the battery is clearly getting hot, stop and do not keep using or charging the car.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0AC4 — Hybrid/EV module requested MIL illumination
- Next code: P0AC6 — Hybrid/EV battery temperature sensor B: signal out...
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem