P0AF2 — Drive motor inverter temperature sensor B circuit fault
| Meaning | The control unit has detected a problem in the circuit of temperature sensor B on the traction motor inverter. The inverter gets very hot and without a reliable temperature the system cannot protect it. Which sensor is B depends on the manufacturer and I cannot say without brand data. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Warning message on the instrument cluster
Cooling fan or pump always running
Vehicle will not enter Ready
Common causes
Damaged wiring or connector
Corroded contact
Fault in the inverter board
Moisture in the connector
What to do
How to read code P0AF2
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0AF2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (F2) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0AF2 mean?
Drive motor inverter temperature sensor B circuit fault. The control unit has detected a problem in the circuit of temperature sensor B on the traction motor inverter. The inverter gets very hot and without a reliable temperature the system cannot protect it. Which sensor is B depends on the manufacturer and I cannot say without brand data.
Can I keep driving with code P0AF2 active?
With caution: limp mode possible, have it checked soon
Common causes — P0AF2
Faulty temperature sensor Damaged wiring or connector Corroded contact Fault in the inverter board Moisture in the connector
How do you fix code P0AF2?
Have the fault diagnosed at a workshop qualified for high voltage. Do not work on the inverter yourself. Avoid heavy loads until it is checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0AF1 — Inverter temperature sensor A intermittent signal
- Next code: P0AF3 — Inverter temperature sensor B implausible reading
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem