Skip to content
Fault code dictionary (DTC)

P0E0F — Generator inverter power supply A: open circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the circuit supplying the generator inverter (supply "A") is broken or open. The inverter does not receive the voltage it needs to work, so the generator does not operate properly. Which supply is "A" depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine or hybrid system warning light on
No high-voltage battery charging
Hybrid system in limp mode
Loss of power
Hard starting or no start
Error messages on the dashboard

Common causes

Blown inverter supply fuse or open relay
Disconnected or corroded supply connector or wire
Damaged wiring
Internal inverter fault
Problem in the low-voltage circuit powering the logic
Weak 12 V battery or poor terminals

What to do

First check the condition of the 12 V battery, its terminals and the inverter fuses listed in the manual. The rest of the checks need a diagnostic tool and personnel qualified for high voltage. Best not to postpone.

How to read code P0E0F

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E0F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E0F mean?

Generator inverter power supply A: open circuit. The control unit detected that the circuit supplying the generator inverter (supply "A") is broken or open. The inverter does not receive the voltage it needs to work, so the generator does not operate properly. Which supply is "A" depends on the manufacturer.

Can I keep driving with code P0E0F active?

With caution: limp mode possible, have it checked soon

Common causes — P0E0F

Blown inverter supply fuse or open relay Disconnected or corroded supply connector or wire Damaged wiring Internal inverter fault Problem in the low-voltage circuit powering the logic Weak 12 V battery or poor terminals

How do you fix code P0E0F?

First check the condition of the 12 V battery, its terminals and the inverter fuses listed in the manual. The rest of the checks need a diagnostic tool and personnel qualified for high voltage. Best not to postpone.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes