P0E16 — Battery coolant heater B control circuit open
| Meaning | The battery management controller detected that the control circuit of coolant heater B is not completing its electrical connection, as if a wire were broken or unplugged. This heater warms the high-voltage battery to the right temperature in cold weather. With the circuit open, the controller cannot command it. |
| Family | Powertrain (P) |
Typical symptoms
Slower charging than usual in cold weather
Reduced range on cold days
Limited power at start-up with a cold battery
Battery management fault message
Common causes
Broken or damaged control wire
Internal failure of the coolant heater
Faulty fuse or relay supplying the heater
Battery management controller fault
What to do
How to read code P0E16
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E16 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E16 mean?
Battery coolant heater B control circuit open. The battery management controller detected that the control circuit of coolant heater B is not completing its electrical connection, as if a wire were broken or unplugged. This heater warms the high-voltage battery to the right temperature in cold weather. With the circuit open, the controller cannot command it.
Can I keep driving with code P0E16 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E16
Loose or corroded heater connector Broken or damaged control wire Internal failure of the coolant heater Faulty fuse or relay supplying the heater Battery management controller fault
How do you fix code P0E16?
Have the heater connector and wiring checked first, as they are the most common cause. It is not an immediate emergency, but a cold battery performs worse, so do not put it off for long. Do not work on high-voltage parts yourself: this needs qualified personnel.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E15 — Hybrid/EV battery coolant heater A: insufficient p...
- Next code: P0E17 — Battery coolant heater B control circuit low
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high