P0E1A — Battery coolant pump B control circuit open
| Meaning | The controller detected that the control circuit of battery coolant pump B is broken. The pump circulates the coolant that keeps the battery at the right temperature. Without a command, circulation may be missing. |
| Family | Powertrain (P) |
Typical symptoms
Battery overheating under load
Reduced power on hills or during fast charging
Slowed charging
Cooling fans constantly noisy
Common causes
Broken control wire
Failed pump
Faulty pump fuse or relay
Controller fault
What to do
How to read code P0E1A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E1A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E1A mean?
Battery coolant pump B control circuit open. The controller detected that the control circuit of battery coolant pump B is broken. The pump circulates the coolant that keeps the battery at the right temperature. Without a command, circulation may be missing.
Can I keep driving with code P0E1A active?
With caution: limp mode possible, have it checked soon
Common causes — P0E1A
Loose or corroded pump connector Broken control wire Failed pump Faulty pump fuse or relay Controller fault
How do you fix code P0E1A?
Have the pump connector, wiring and fuse checked soon. Without cooling the battery can overheat, so avoid fast charging and heavy use until it is checked. Qualified high-voltage technicians are needed.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E19 — Battery coolant heater B performance fault
- Next code: P0E1B — Battery coolant pump B control circuit low
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high