Skip to content
Fault code dictionary (DTC)

P0E29 — Drive motor inverter temperature sensor H range/performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningSensor H, which measures the temperature of the traction motor inverter, is sending a value the controller finds illogical or inconsistent with the other sensors. The electrical circuit may be intact, but the reading is not credible.
FamilyPowertrain (P)

Typical symptoms

Hybrid/EV system warning light on
Reduced power for no apparent reason
Cooling that activates unnecessarily
Reduced mode while driving
Drive system fault message

Common causes

Misreading or aged sensor
Connector with abnormal resistance
Inverter cooling problem
Poor thermal contact of the sensor
Controller fault

What to do

Have the sensor compared with the others and the inverter cooling checked. Drive carefully if power is reduced. Do not delay too long.

How to read code P0E29

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E29 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E29 mean?

Drive motor inverter temperature sensor H range/performance. Sensor H, which measures the temperature of the traction motor inverter, is sending a value the controller finds illogical or inconsistent with the other sensors. The electrical circuit may be intact, but the reading is not credible.

Can I keep driving with code P0E29 active?

With caution: limp mode possible, have it checked soon

Common causes — P0E29

Misreading or aged sensor Connector with abnormal resistance Inverter cooling problem Poor thermal contact of the sensor Controller fault

How do you fix code P0E29?

Have the sensor compared with the others and the inverter cooling checked. Drive carefully if power is reduced. Do not delay too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes