Skip to content
Fault code dictionary (DTC)

P0E31 — DC/DC converter voltage sensor A circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found an electrical fault in the circuit of voltage sensor A on the DC/DC converter, the unit that charges the 12 V battery from the traction battery. Without a correct reading, the unit cannot regulate the 12 V supply well.
FamilyPowertrain (P)

Typical symptoms

Battery or hybrid system warning light on
12 V battery going flat
Lights or displays getting dim
Hard starting of the system
Electrical system error messages

Common causes

Faulty sensor wiring or connector
Failed voltage sensor
Internal converter fault
Weak 12 V battery disturbing measurements
Poor ground or supply

What to do

Check the 12 V battery right away: if it is weak, it can cause many related errors. Then a diagnosis at a qualified shop is needed. If the car loses 12 V power, you risk being stranded.

How to read code P0E31

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E31 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E31 mean?

DC/DC converter voltage sensor A circuit fault. The control unit found an electrical fault in the circuit of voltage sensor A on the DC/DC converter, the unit that charges the 12 V battery from the traction battery. Without a correct reading, the unit cannot regulate the 12 V supply well.

Can I keep driving with code P0E31 active?

With caution: limp mode possible, have it checked soon

Common causes — P0E31

Faulty sensor wiring or connector Failed voltage sensor Internal converter fault Weak 12 V battery disturbing measurements Poor ground or supply

How do you fix code P0E31?

Check the 12 V battery right away: if it is weak, it can cause many related errors. Then a diagnosis at a qualified shop is needed. If the car loses 12 V power, you risk being stranded.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes