P0E45 — Traction battery voltage sensor E: out-of-range reading
| Meaning | The control unit is receiving from sensor E, which monitors traction battery voltage, a value that does not match what is expected or the other measurements. The signal arrives but is not believable. Which point sensor E measures depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Charge indicator jumps or is inconsistent
Incomplete or interrupted charging
Lower range than usual
Common causes
Connector or terminals with poor contact
Wiring with abnormal resistance
Imbalance or problem in part of the battery pack
Problem in the battery management module
What to do
How to read code P0E45
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E45 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E45 mean?
Traction battery voltage sensor E: out-of-range reading. The control unit is receiving from sensor E, which monitors traction battery voltage, a value that does not match what is expected or the other measurements. The signal arrives but is not believable. Which point sensor E measures depends on the manufacturer.
Can I keep driving with code P0E45 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E45
Voltage sensor reading off Connector or terminals with poor contact Wiring with abnormal resistance Imbalance or problem in part of the battery pack Problem in the battery management module
How do you fix code P0E45?
This is high voltage: do not work on orange cables. Have the battery pack data read with a suitable tool, because it must be clarified whether it is a measurement problem or a battery problem. Do not ignore it if power drops.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E44 — Traction battery voltage sensor E: circuit fault
- Next code: P0E46 — Traction battery voltage sensor E: signal low
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high