Skip to content
Fault code dictionary (DTC)

P0E50 — Motor electronics coolant pump B: unstable control signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the control signal of coolant pump B for the power electronics (inverter and electric motor) comes and goes irregularly. Which pump is B depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Malfunction or temperature warning light on
Reduced power to protect the electronics
Hybrid/electric system overheating warning
Cooling fan constantly noisy
Problem that appears at times

Common causes

Pump connector with intermittent contact
Wiring with a partly broken wire
Pump with intermittent fault
Low coolant level or air in the circuit
Problem in the module that controls the pump

What to do

Check the level in the reservoir dedicated to the electronics, without opening it if the system is hot. Then have the pump, connector and wiring checked. If a temperature warning appears, stop safely: overheating can damage the electronics.

How to read code P0E50

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E50 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E50 mean?

Motor electronics coolant pump B: unstable control signal. The control unit detected that the control signal of coolant pump B for the power electronics (inverter and electric motor) comes and goes irregularly. Which pump is B depends on the manufacturer.

Can I keep driving with code P0E50 active?

With caution: limp mode possible, have it checked soon

Common causes — P0E50

Pump connector with intermittent contact Wiring with a partly broken wire Pump with intermittent fault Low coolant level or air in the circuit Problem in the module that controls the pump

How do you fix code P0E50?

Check the level in the reservoir dedicated to the electronics, without opening it if the system is hot. Then have the pump, connector and wiring checked. If a temperature warning appears, stop safely: overheating can damage the electronics.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes