Skip to content
Fault code dictionary (DTC)

P0E5C — DC/DC converter temperature sensor C: intermittent signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has seen the signal from the DC/DC converter's temperature sensor C drop out and come back, or jump between very different values. This is usually a sign of a poor contact in the wiring or connector. The fault may only appear with vibration, heat or moisture.
FamilyPowertrain (P)

Typical symptoms

Warning light that comes on and goes off
Cooling fan changing speed for no reason
Power reduced at times
Temperature messages that appear and disappear
Uneven charging of the 12-volt battery

Common causes

Sensor connector with a poor contact
Partly broken or chafed wire
Moisture or corrosion in the contacts
Temperature sensor starting to fail
Intermittent internal fault in the DC/DC converter

What to do

Have the sensor's connectors and wiring checked, looking for the contact that gives way. Don't have the code erased without finding the cause, because it would come back. Work on the high-voltage system belongs to a qualified workshop.

How to read code P0E5C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E5C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E5C mean?

DC/DC converter temperature sensor C: intermittent signal. The control unit has seen the signal from the DC/DC converter's temperature sensor C drop out and come back, or jump between very different values. This is usually a sign of a poor contact in the wiring or connector. The fault may only appear with vibration, heat or moisture.

Can I keep driving with code P0E5C active?

With caution: limp mode possible, have it checked soon

Common causes — P0E5C

Sensor connector with a poor contact Partly broken or chafed wire Moisture or corrosion in the contacts Temperature sensor starting to fail Intermittent internal fault in the DC/DC converter

How do you fix code P0E5C?

Have the sensor's connectors and wiring checked, looking for the contact that gives way. Don't have the code erased without finding the cause, because it would come back. Work on the high-voltage system belongs to a qualified workshop.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes