P0E73 — Hybrid Battery Pack Voltage Sense B Circuit Intermittent
| Meaning | The powertrain control module has detected an erratic or intermittent signal voltage from a specific section of the hybrid or electric vehicle high-voltage battery monitoring circuit. This means the computer cannot reliably read the voltage data from that part of the battery pack, which is critical for safe operation. |
| Family | Powertrain (P) |
Typical symptoms
Hybrid system warning message on the dashboard
Possible limitation in electric vehicle drive mode or reduced power
Common causes
Damaged wiring or chafed insulation along the hybrid battery monitoring loom
Internal failure within the battery energy control module or cell monitoring board
What to do
How to read code P0E73
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E73 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E73 mean?
Hybrid Battery Pack Voltage Sense B Circuit Intermittent. The powertrain control module has detected an erratic or intermittent signal voltage from a specific section of the hybrid or electric vehicle high-voltage battery monitoring circuit. This means the computer cannot reliably read the voltage data from that part of the battery pack, which is critical for safe operation.
Can I keep driving with code P0E73 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E73
Loose or oxidized pins in the battery management system harness connectors Damaged wiring or chafed insulation along the hybrid battery monitoring loom Internal failure within the battery energy control module or cell monitoring board
How do you fix code P0E73?
Due to the high-voltage nature of hybrid systems, have a technician inspect the battery wiring harnesses and module connections soon. Avoid driving if the vehicle enters a limp mode or displays critical electrical warnings.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E72 — Hybrid Battery Pack Voltage Sense Circuit Range or...
- Next code: P0E74 — Hybrid Battery Pack Cooling Fan Control Circuit Pe...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high