P0E79 — Hybrid Battery Pack Cooling Fan E Control Circuit Performance
| Meaning | The powertrain control module has detected an issue with the cooling fan that regulates the temperature of the high-voltage hybrid battery pack. This means the system is not getting accurate feedback from fan control circuit E, or the fan is not responding as expected to the computer's commands. |
| Family | Powertrain (P) |
Typical symptoms
Possible reduced electric vehicle mode functionality
Cooling fan noise may be missing or running constantly
Common causes
Damaged wiring or loose electrical connector at the fan
Blown fuse related to the hybrid cooling system
Internal failure within the hybrid battery control module
What to do
How to read code P0E79
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E79 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E79 mean?
Hybrid Battery Pack Cooling Fan E Control Circuit Performance. The powertrain control module has detected an issue with the cooling fan that regulates the temperature of the high-voltage hybrid battery pack. This means the system is not getting accurate feedback from fan control circuit E, or the fan is not responding as expected to the computer's commands.
Can I keep driving with code P0E79 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E79
Faulty hybrid battery cooling fan Damaged wiring or loose electrical connector at the fan Blown fuse related to the hybrid cooling system Internal failure within the hybrid battery control module
How do you fix code P0E79?
You should check the cooling fan fuse and wiring harness near the battery pack first. Do not ignore this code, as running a hybrid battery without proper cooling can cause permanent damage to the cells.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E78 — Hybrid Battery Pack Cooling Fan Control Circuit Pe...
- Next code: P0E7A — Coolant bypass valve A stuck closed
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high