Skip to content
Fault code dictionary (DTC)

P0E82 — Auxiliary cooling temperature sensor A range/performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives a value from auxiliary cooling sensor A that does not fit the other conditions, for example too static or in conflict with other sensors. The circuit is not necessarily broken, but the reading cannot be trusted. Exact location and function depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Fans or pump behaving abnormally
Temperature of some components poorly controlled
Reduced power in certain conditions
Limited charging or performance in electric or hybrid vehicles

Common causes

Sensor drifting or slow to respond
Oxidized connector contacts
Air in the circuit or low level
Poor coolant circulation from a faulty pump or valve
Harness with abnormal resistance
Problem in the control unit

What to do

Check the coolant level when cold and the condition of the sensor connector. A workshop will compare the temperature read with the real one and with other sensors after the car has sat unused. Have it checked without too much delay.

How to read code P0E82

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E82 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E82 mean?

Auxiliary cooling temperature sensor A range/performance. The control unit receives a value from auxiliary cooling sensor A that does not fit the other conditions, for example too static or in conflict with other sensors. The circuit is not necessarily broken, but the reading cannot be trusted. Exact location and function depend on the manufacturer.

Can I keep driving with code P0E82 active?

With caution: limp mode possible, have it checked soon

Common causes — P0E82

Sensor drifting or slow to respond Oxidized connector contacts Air in the circuit or low level Poor coolant circulation from a faulty pump or valve Harness with abnormal resistance Problem in the control unit

How do you fix code P0E82?

Check the coolant level when cold and the condition of the sensor connector. A workshop will compare the temperature read with the real one and with other sensors after the car has sat unused. Have it checked without too much delay.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes