Skip to content
Fault code dictionary (DTC)

P0EAE — A/C compressor motor current sensor: range/performance fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found that the current measured on the A/C compressor motor is outside a reasonable range or doesn't fit how the compressor is running. There is a signal, but it doesn't match what the compressor should be doing. It can come from the sensor or from the compressor itself.
FamilyPowertrain (P)

Typical symptoms

Air conditioning weak
Warning light on
Compressor stopping or starting in jerks
Warning messages on the dashboard
Unusual noises from the compressor

Common causes

Sensor reading out of range
Compressor motor with friction or internal wear
Abnormal refrigerant or lubricant level in the A/C circuit
Compressor inverter not regulating properly
Connectors with poor contact
Faulty control unit

What to do

Have the current values checked with a diagnostic tool and the A/C circuit inspected, including the refrigerant and lubricant charge. Only qualified personnel should work on high voltage. You can drive, but don't leave the problem for long.

How to read code P0EAE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EAE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EAE mean?

A/C compressor motor current sensor: range/performance fault. The control unit found that the current measured on the A/C compressor motor is outside a reasonable range or doesn't fit how the compressor is running. There is a signal, but it doesn't match what the compressor should be doing. It can come from the sensor or from the compressor itself.

Can I keep driving with code P0EAE active?

With caution: limp mode possible, have it checked soon

Common causes — P0EAE

Sensor reading out of range Compressor motor with friction or internal wear Abnormal refrigerant or lubricant level in the A/C circuit Compressor inverter not regulating properly Connectors with poor contact Faulty control unit

How do you fix code P0EAE?

Have the current values checked with a diagnostic tool and the A/C circuit inspected, including the refrigerant and lubricant charge. Only qualified personnel should work on high voltage. You can drive, but don't leave the problem for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes