Skip to content
Fault code dictionary (DTC)

P0EC2 — A/C refrigerant temperature sensor B: signal high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the signal from refrigerant temperature sensor B is too high. This usually means an open circuit or an unplugged sensor, which the unit reads as an extremely low temperature. The compressor control may be limited.
FamilyPowertrain (P)

Typical symptoms

A/C cools poorly or not at all
Compressor does not engage
Warning light on
A/C works intermittently
Implausible refrigerant temperature value on the scan tool

Common causes

Sensor connector unplugged or corroded
Broken sensor wire
Faulty temperature sensor
Wire shorted to power
Failure of the climate control unit

What to do

First check that the sensor connector is fully seated and the wire is not broken. Then read the sensor value with a diagnostic tool. It is not a safety issue, but it is wise to have the system checked soon.

How to read code P0EC2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EC2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EC2 mean?

A/C refrigerant temperature sensor B: signal high. The control unit detected that the signal from refrigerant temperature sensor B is too high. This usually means an open circuit or an unplugged sensor, which the unit reads as an extremely low temperature. The compressor control may be limited.

Can I keep driving with code P0EC2 active?

With caution: limp mode possible, have it checked soon

Common causes — P0EC2

Sensor connector unplugged or corroded Broken sensor wire Faulty temperature sensor Wire shorted to power Failure of the climate control unit

How do you fix code P0EC2?

First check that the sensor connector is fully seated and the wire is not broken. Then read the sensor value with a diagnostic tool. It is not a safety issue, but it is wise to have the system checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes