P0EEE — Charge port temperature B too high
| Meaning | The control unit has detected that the temperature measured by sensor B on the charge port has exceeded the permitted limit. Unlike a sensor fault, here the value is believable and the port is really getting hot. Which point of the port is B depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charge port or plug hot to the touch
Burning smell near the port
Charging error message
Warning light on
Common causes
Damaged charging plug or cable
Connection not fully inserted
Home charging installation undersized or with loose connections
Charge port deformed by heat
Sensor reading incorrectly
What to do
How to read code P0EEE
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0EEE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0EEE mean?
Charge port temperature B too high. The control unit has detected that the temperature measured by sensor B on the charge port has exceeded the permitted limit. Unlike a sensor fault, here the value is believable and the port is really getting hot. Which point of the port is B depends on the manufacturer.
Can I keep driving with code P0EEE active?
With caution: limp mode possible, have it checked soon
Common causes — P0EEE
Port contacts dirty, oxidised or worn Damaged charging plug or cable Connection not fully inserted Home charging installation undersized or with loose connections Charge port deformed by heat Sensor reading incorrectly
How do you fix code P0EEE?
Stop charging and let everything cool down. Look at the port and plug for burn marks, deformation or dirt, and try another cable or another charging point. If the problem returns or you see signs of heat, stop charging and have the port and installation checked: it is a safety matter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0EED — Hybrid/EV battery system discharge circuit: perfor...
- Next code: P0EEF — Drive motor A control module overtemperature
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high