P1464 — A/C demand out of self-test range
| Meaning | During self-test, the control unit saw that the air conditioning request signal was not in the right state, for example on when it should not be. The code is manufacturer-defined and I have no reliable information on how each brand runs this test. |
| Family | Powertrain (P) |
Typical symptoms
A/C on or off for no reason
Compressor starting randomly
Irregular idle
No obvious symptoms
Common causes
Damaged wiring or connector
Stuck request signal
Abnormal compressor relay
Climate or engine control unit fault (rare)
What to do
How to read code P1464
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1464 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (4) points to auxiliary emission controls, and the last two (64) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1464 mean?
A/C demand out of self-test range. During self-test, the control unit saw that the air conditioning request signal was not in the right state, for example on when it should not be. The code is manufacturer-defined and I have no reliable information on how each brand runs this test.
Can I keep driving with code P1464 active?
With caution: limp mode possible, have it checked soon
Common causes — P1464
Faulty dashboard A/C switch Damaged wiring or connector Stuck request signal Abnormal compressor relay Climate or engine control unit fault (rare)
How do you fix code P1464?
If the light comes on, check that the A/C was off during the self-test and have the fault read with a suitable tool. You can keep driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1463 — A/C pressure sensor insufficient pressure change
- Next code: P1465 — A/C relay circuit malfunction
Related codes
- P1400 — EGR differential pressure sensor: low signal
- P1401 — EGR differential pressure sensor: high signal
- P1402 — EGR metering orifice restricted
- P1403 — EGR differential pressure sensor hoses reversed
- P1404 — Intake air temp sensor circuit or EGR closed-position fault
- P1405 — Upstream EGR pressure sensor hose off or blocked
- P1406 — EGR position sensor performance fault
- P1407 — No EGR flow detected
- P1408 — EGR flow outside self-test range
- P1409 — EGR vacuum regulator control circuit fault
- P1411 — Secondary air system incorrect downstream flow
- P1413 — Secondary air system monitor circuit low input