P1467 — A/C compressor temperature sensor malfunction
| Meaning | The control unit detects a problem in the sensor that measures the air conditioning compressor temperature. Without that data it may switch the compressor off to protect it. The code is manufacturer-defined. |
| Family | Powertrain (P) |
Typical symptoms
Compressor stopping by itself
Check engine light on
Intermittent A/C
No driving symptoms
Common causes
Corroded or loose connector
Damaged wiring
Compressor genuinely overheating
Control unit fault (rare)
What to do
How to read code P1467
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1467 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (4) points to auxiliary emission controls, and the last two (67) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1467 mean?
A/C compressor temperature sensor malfunction. The control unit detects a problem in the sensor that measures the air conditioning compressor temperature. Without that data it may switch the compressor off to protect it. The code is manufacturer-defined.
Can I keep driving with code P1467 active?
With caution: limp mode possible, have it checked soon
Common causes — P1467
Faulty temperature sensor Corroded or loose connector Damaged wiring Compressor genuinely overheating Control unit fault (rare)
How do you fix code P1467?
Check the sensor, connector and wiring near the compressor. If you hear strange noises from the compressor, avoid using the A/C and have it looked at soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1466 — A/C refrigerant temperature sensor/circuit malfunc...
- Next code: P1468 — SSPOD open or closed circuit fault (manufacturer c...
Related codes
- P1400 — EGR differential pressure sensor: low signal
- P1401 — EGR differential pressure sensor: high signal
- P1402 — EGR metering orifice restricted
- P1403 — EGR differential pressure sensor hoses reversed
- P1404 — Intake air temp sensor circuit or EGR closed-position fault
- P1405 — Upstream EGR pressure sensor hose off or blocked
- P1406 — EGR position sensor performance fault
- P1407 — No EGR flow detected
- P1408 — EGR flow outside self-test range
- P1409 — EGR vacuum regulator control circuit fault
- P1411 — Secondary air system incorrect downstream flow
- P1413 — Secondary air system monitor circuit low input