P1720 — Vehicle speed signal circuit fault
| Meaning | P1720 is a manufacturer-defined code. The reference definition points to a malfunction in the vehicle speed circuit. The control module is getting a speed signal that is missing, unstable, or inconsistent with other data. The exact meaning depends on the brand, so confirm it in the official documentation. |
| Family | Powertrain (P) |
Typical symptoms
Erratic shifting in an automatic transmission
Check engine or transmission light on
Cruise control not working
Possible ABS or traction control issues
Common causes
Damaged wiring or connector
Damaged tone ring or reluctor
Instrument cluster or module receiving the signal incorrectly
Poor electrical ground
What to do
How to read code P1720
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1720 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (7) points to transmission, and the last two (20) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1720 mean?
Vehicle speed signal circuit fault. P1720 is a manufacturer-defined code. The reference definition points to a malfunction in the vehicle speed circuit. The control module is getting a speed signal that is missing, unstable, or inconsistent with other data. The exact meaning depends on the brand, so confirm it in the official documentation.
Can I keep driving with code P1720 active?
With caution: limp mode possible, have it checked soon
Common causes — P1720
Dirty or faulty speed sensor Damaged wiring or connector Damaged tone ring or reluctor Instrument cluster or module receiving the signal incorrectly Poor electrical ground
How do you fix code P1720?
Have the sensor, wiring, and connector checked and compare the measured speed signal with the real speed. You can drive carefully, but the transmission may misbehave, so deal with it soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1718 — Transmission fluid temperature sensor reading too...
- Next code: P1721 — First gear ratio incorrect
Related codes
- P1700 — Automatic transmission indeterminate fault, fails to neutral
- P1701 — Reverse gear engagement error
- P1702 — Transmission range sensor signal intermittent
- P1703 — Brake switch out of self-test range
- P1704 — Digital range sensor failed to change state in self-test
- P1705 — Selector not in P or N during self-test
- P1706 — High vehicle speed seen while in Park
- P1707 — Transfer case neutral indicator hard fault
- P1708 — Clutch switch circuit fault
- P1709 — PNP switch out of self-test range
- P1711 — Transmission fluid temp sensor out of self-test range
- P1712 — Transmission torque reduction request signal fault