P1782 — P/ES circuit out of self-test range
| Meaning | During self-test the control unit found the signal of a circuit labelled P/ES out of range. I do not have solid information on what the abbreviation means for each brand, so I will not guess. The code does indicate an implausible electrical signal in a circuit tied to the gearbox. |
| Family | Powertrain (P) |
Typical symptoms
Irregular gearbox behaviour
Related function unavailable
Other transmission codes stored
Sometimes no obvious symptoms
Common causes
Faulty switch or sensor in the circuit
Corroded contacts
Unstable power or ground
Failed control unit
What to do
How to read code P1782
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1782 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (7) points to transmission, and the last two (82) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1782 mean?
P/ES circuit out of self-test range. During self-test the control unit found the signal of a circuit labelled P/ES out of range. I do not have solid information on what the abbreviation means for each brand, so I will not guess. The code does indicate an implausible electrical signal in a circuit tied to the gearbox.
Can I keep driving with code P1782 active?
With caution: limp mode possible, have it checked soon
Common causes — P1782
Damaged wiring or connector Faulty switch or sensor in the circuit Corroded contacts Unstable power or ground Failed control unit
How do you fix code P1782?
Have the exact definition read on a brand-specific scan tool, which will name the component involved. In the meantime check the connectors and watch whether the gearbox behaviour changes.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1781 — 4x4 switch out of self-test range
- Next code: P1783 — Automatic transmission overtemperature
Related codes
- P1700 — Automatic transmission indeterminate fault, fails to neutral
- P1701 — Reverse gear engagement error
- P1702 — Transmission range sensor signal intermittent
- P1703 — Brake switch out of self-test range
- P1704 — Digital range sensor failed to change state in self-test
- P1705 — Selector not in P or N during self-test
- P1706 — High vehicle speed seen while in Park
- P1707 — Transfer case neutral indicator hard fault
- P1708 — Clutch switch circuit fault
- P1709 — PNP switch out of self-test range
- P1711 — Transmission fluid temp sensor out of self-test range
- P1712 — Transmission torque reduction request signal fault