P1916 — High clutch drum speed sensor malfunction
| Meaning | The transmission control unit detected a problem with the sensor that measures the rotation speed of the "high" clutch drum. This code is manufacturer-defined and this terminology belongs to certain automatic gearboxes: I have no reliable details on how it applies to every make. Without this data the control unit cannot check whether the clutches are working correctly. |
| Family | Powertrain (P) |
Typical symptoms
Slipping with engine revs rising
Transmission or engine light on
Gearbox in limp mode
Unstable speedometer or gear indicator
Common causes
Faulty speed sensor
Metal debris on the sensor from contaminated fluid
Damaged reluctor ring or drum
Transmission fluid low or degraded
Internal fault in the transmission control unit (rare)
What to do
How to read code P1916
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1916 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (9) points to transmission, and the last two (16) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1916 mean?
High clutch drum speed sensor malfunction. The transmission control unit detected a problem with the sensor that measures the rotation speed of the "high" clutch drum. This code is manufacturer-defined and this terminology belongs to certain automatic gearboxes: I have no reliable details on how it applies to every make. Without this data the control unit cannot check whether the clutches are working correctly.
Can I keep driving with code P1916 active?
With caution: limp mode possible, have it checked soon
Common causes — P1916
Sensor connector or wiring with a poor contact Faulty speed sensor Metal debris on the sensor from contaminated fluid Damaged reluctor ring or drum Transmission fluid low or degraded Internal fault in the transmission control unit (rare)
How do you fix code P1916?
First check the fluid level and condition, then the sensor connector and wiring. If the gearbox slips or goes into limp mode, avoid driving for long. Do not clear the code to make it disappear.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1915 — Reverse switch circuit malfunction
- Next code: P1917 — High clutch drum speed sensor intermittent
Related codes
- P1900 — Output speed sensor circuit intermittent fault
- P1901 — Input speed sensor circuit intermittent fault
- P1902 — Pressure control solenoid B intermittent short
- P1903 — Transmission pressure solenoid "C" short circuit
- P1904 — Transmission pressure solenoid "C" open circuit
- P1905 — Transmission pressure solenoid "C" intermittent short
- P1906 — Kickdown pull relay open or shorted to ground
- P1907 — Kickdown hold relay open or shorted to ground
- P1908 — Transmission pressure solenoid open or shorted to ground
- P1909 — Transmission temperature sensor circuit open or shorted
- P1910 — Variable force solenoid A: pressure output too low
- P1911 — Variable force solenoid B: pressure output too low