P205C — cylinder 10 misfire,CAT damageed (P0310)
| Meaning | cylinder 10 misfire,CAT damageed (P0310). |
| Family | Powertrain (P) |
How to read code P205C
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code P205C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (5C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P205C mean?
cylinder 10 misfire,CAT damageed (P0310).
Can I keep driving with code P205C active?
With caution: limp mode possible, have it checked soon
How do you fix code P205C?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P205B — Reductant temperature sensor range/performance
- Next code: P205E — Component N15/3 (ETC control module) memory is fau...
Related codes
- P2000 — NOx Trap Efficiency Below Threshold Bank 1
- P2001 — NOx Trap Efficiency Below Threshold Bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate Trap Efficiency Below Threshold Bank 2
- P2004 — Intake Manifold Runner Control Stuck Open Bank 1
- P2005 — Intake Manifold Runner Control Stuck Open Bank 2
- P2006 — Intake Manifold Runner Control Stuck Closed Bank 1
- P2007 — Intake Manifold Runner Control Stuck Closed Bank 2
- P2008 — Intake Manifold Runner Control Circuit/Open Bank 1
- P2009 — Intake Manifold Runner Control Circuit Low Bank 1
- P200A — Component N15/3(ETC control module) is faulty.
- P200B — Component N15/3(ETC control module) is faulty.