Skip to content
Fault code dictionary (DTC)

P2066 — Fuel level sensor B: implausible signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives from the second fuel level sensor (B) a value that isn't believable, for example stuck while the level changes or conflicting with the other sensor. The circuit may be electrically fine, but the data isn't reliable. The dashboard gauge may therefore be wrong.
FamilyPowertrain (P)

Typical symptoms

Engine warning light on
Fuel gauge stuck or inaccurate
Level not changing after refuelling
Unrealistic estimated range

Common causes

Stuck or dirty float
Worn level sensor B
Poor contact in the connector
Deformed tank or pump assembly
Control unit problem, less common

What to do

Compare the gauge with the litres you actually add, and note whether the error is constant. The data of both sensors should then be read to see which one is wrong. It isn't an urgent fault, but don't trust the gauge for your range.

How to read code P2066

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2066 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (66) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2066 mean?

Fuel level sensor B: implausible signal. The control unit receives from the second fuel level sensor (B) a value that isn't believable, for example stuck while the level changes or conflicting with the other sensor. The circuit may be electrically fine, but the data isn't reliable. The dashboard gauge may therefore be wrong.

Can I keep driving with code P2066 active?

With caution: limp mode possible, have it checked soon

Common causes — P2066

Stuck or dirty float Worn level sensor B Poor contact in the connector Deformed tank or pump assembly Control unit problem, less common

How do you fix code P2066?

Compare the gauge with the litres you actually add, and note whether the error is constant. The data of both sensors should then be read to see which one is wrong. It isn't an urgent fault, but don't trust the gauge for your range.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes