P2118 — Throttle motor: current out of range or poor performance
| Meaning | The engine computer measures the current drawn by the motor that moves the throttle and finds it outside normal values, or the motor does not respond as it should. It can be due to excessive friction in the throttle or an electrical fault. The computer may limit power for safety. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Unstable idle
Slow or jerky pedal response
Stalling or hard starting
Common causes
Worn motor or internal gears
Corroded connectors or wiring with abnormal resistance
Low supply voltage (weak battery or poor ground)
Short or open circuit in the motor wiring
Faulty engine control unit (rare)
What to do
How to read code P2118
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2118 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (18) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2118 mean?
Throttle motor: current out of range or poor performance. The engine computer measures the current drawn by the motor that moves the throttle and finds it outside normal values, or the motor does not respond as it should. It can be due to excessive friction in the throttle or an electrical fault. The computer may limit power for safety.
Can I keep driving with code P2118 active?
With caution: limp mode possible, have it checked soon
Common causes — P2118
Dirty or stiff throttle body Worn motor or internal gears Corroded connectors or wiring with abnormal resistance Low supply voltage (weak battery or poor ground) Short or open circuit in the motor wiring Faulty engine control unit (rare)
How do you fix code P2118?
First have the throttle cleanliness and free movement checked, then battery voltage, ground and connectors. Do not leave it for long: it can get worse until power is lost.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2117 — Throttle/pedal sensor F: minimum stop performance
- Next code: P2119 — Throttle body: range or performance fault
Related codes
- P2100 — Throttle actuator motor circuit open
- P2101 — Throttle actuator motor circuit range/performance
- P2102 — Throttle actuator motor circuit low
- P2103 — Throttle actuator motor circuit high
- P2104 — Throttle actuator control system forced idle
- P2105 — Throttle actuator control system forced engine shutdown
- P2106 — Throttle actuator control system forced limited power
- P2107 — Throttle actuator control module processor fault
- P2108 — Throttle actuator control module performance
- P2109 — Throttle/pedal sensor A minimum stop performance
- P210A — Starter lockout relay K38/3: short circuit or open wiring
- P210B — Throttle actuator B control motor circuit range/performance