Skip to content
Fault code dictionary (DTC)

P21A4 — Cylinder 9 air-fuel mixture imbalance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer found that the air-fuel mixture in cylinder 9 differs abnormally from the other cylinders. An engine with at least nine cylinders is normally a V10 or V12. Cylinder 9 is running too rich or too lean, and the code tells you where to start.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough idle or engine shaking
Loss of power when accelerating
Higher fuel consumption than usual
Smell of unburned fuel from the exhaust
Jerking while driving

Common causes

Cylinder 9 injector dirty, leaking or delivering too little
Air leak or bad gasket near cylinder 9
Worn spark plug or ignition coil on cylinder 9
Low compression in cylinder 9 (valve or piston rings)
Oxygen sensor on the affected bank reading incorrectly
Damaged wiring or connector at the injector

What to do

First check whether misfire or fuel trim codes are also stored, and which bank cylinder 9 belongs to. Then inspect the spark plug, coil and injector of that cylinder and look for air leaks. It is better not to drive for long like this, to avoid damaging the catalytic converter.

How to read code P21A4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P21A4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (A4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P21A4 mean?

Cylinder 9 air-fuel mixture imbalance. The engine computer found that the air-fuel mixture in cylinder 9 differs abnormally from the other cylinders. An engine with at least nine cylinders is normally a V10 or V12. Cylinder 9 is running too rich or too lean, and the code tells you where to start.

Can I keep driving with code P21A4 active?

With caution: limp mode possible, have it checked soon

Common causes — P21A4

Cylinder 9 injector dirty, leaking or delivering too little Air leak or bad gasket near cylinder 9 Worn spark plug or ignition coil on cylinder 9 Low compression in cylinder 9 (valve or piston rings) Oxygen sensor on the affected bank reading incorrectly Damaged wiring or connector at the injector

How do you fix code P21A4?

First check whether misfire or fuel trim codes are also stored, and which bank cylinder 9 belongs to. Then inspect the spark plug, coil and injector of that cylinder and look for air leaks. It is better not to drive for long like this, to avoid damaging the catalytic converter.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes