Skip to content
Fault code dictionary (DTC)

P224C — Alternative fuel tank shutoff valve A: control circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer detected a break in the control circuit of valve A that shuts off the alternative fuel tank, for example LPG or CNG. That valve opens and closes the flow from the tank. If the command does not arrive, the valve may not work as intended. The code is a SAE standard, but how the system is built varies a lot from car to car.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Engine does not switch to the alternative fuel
Running on petrol only
Lack of power or stalling while running on gas
Hard starting on gas

Common causes

Loose, corroded or damaged valve connector
Broken control wire
Faulty coil or electrical part of the valve
Failed fuse or relay in the valve supply
Rarely, a fault in the control unit that manages the system

What to do

First check the fuse, connector and wiring of the tank valve. If the car also runs on petrol you can use it that way, but have the system checked by a workshop qualified in gas systems. If you smell gas, stop and have the system inspected immediately.

How to read code P224C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P224C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (4C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P224C mean?

Alternative fuel tank shutoff valve A: control circuit open. The engine computer detected a break in the control circuit of valve A that shuts off the alternative fuel tank, for example LPG or CNG. That valve opens and closes the flow from the tank. If the command does not arrive, the valve may not work as intended. The code is a SAE standard, but how the system is built varies a lot from car to car.

Can I keep driving with code P224C active?

With caution: limp mode possible, have it checked soon

Common causes — P224C

Loose, corroded or damaged valve connector Broken control wire Faulty coil or electrical part of the valve Failed fuse or relay in the valve supply Rarely, a fault in the control unit that manages the system

How do you fix code P224C?

First check the fuse, connector and wiring of the tank valve. If the car also runs on petrol you can use it that way, but have the system checked by a workshop qualified in gas systems. If you smell gas, stop and have the system inspected immediately.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes