P224B — NOx sensor bank 1 sensor 2: heater resistance out of range
| Meaning | The engine computer found that the electrical resistance of the downstream NOx (nitrogen oxides) sensor heater on bank 1 is outside the expected values. The heater brings the sensor up to temperature so it can read correctly. The sensor may therefore give unreliable data to the emissions control system. The exact meaning may vary by manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Possible emissions system fault warning
Unusual AdBlue consumption, on engines that use it
Possible power or restart limitation on some models
Worse emissions
Common causes
Damaged or corroded connector or wiring
Faulty NOx sensor
Supply or ground problem
Rarely, a fault in the control unit
What to do
How to read code P224B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P224B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (4B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P224B mean?
NOx sensor bank 1 sensor 2: heater resistance out of range. The engine computer found that the electrical resistance of the downstream NOx (nitrogen oxides) sensor heater on bank 1 is outside the expected values. The heater brings the sensor up to temperature so it can read correctly. The sensor may therefore give unreliable data to the emissions control system. The exact meaning may vary by manufacturer.
Can I keep driving with code P224B active?
With caution: limp mode possible, have it checked soon
Common causes — P224B
Degraded internal heater in the downstream NOx sensor Damaged or corroded connector or wiring Faulty NOx sensor Supply or ground problem Rarely, a fault in the control unit
How do you fix code P224B?
Start with the connector and wires of the downstream NOx sensor, looking for corrosion or burnt or pinched wires. If they are in order, the sensor should be checked with a suitable tool. Don't let too much time pass, because some vehicles apply limitations if the problem persists.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P224A — NOx sensor bank 1 sensor 1: heater resistance out...
- Next code: P224C — Alternative fuel tank shutoff valve A: control cir...
Related codes
- P2200 — NOx sensor circuit fault, bank 1
- P2201 — NOx sensor circuit range/performance, bank 1
- P2202 — NOx sensor circuit low input, bank 1
- P2203 — NOx sensor circuit high input, bank 1
- P2204 — NOx sensor intermittent signal, bank 1
- P2205 — NOx sensor heater control circuit open, bank 1
- P2206 — NOx sensor heater control circuit low, bank 1
- P2207 — NOx sensor heater control circuit high, bank 1
- P2208 — NOx sensor heater sense circuit, bank 1
- P2209 — NOx sensor heater sense circuit out of range, bank 1
- P220A — Speed signal comparison implausible, Y3/6n2 and Y3/6n3
- P220B — Speed too high, Y3/6n2 or Y3/6n3