Skip to content
Fault code dictionary (DTC)

P226D — Particulate filter deteriorated or empty, bank 1

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has found that the bank 1 particulate filter does not behave like an intact filter. It may be damaged, hollowed out inside or missing altogether. It usually detects this by comparing pressures or temperatures before and after the filter.
FamilyPowertrain (P)

Typical symptoms

Check engine light or particulate filter light on
Unusual smoke or smell from the exhaust
Exhaust sound different from usual
Loss of power
More frequent or failed regenerations

Common causes

Broken or melted ceramic core inside the filter
Filter removed or replaced with an unsuitable one
Faulty differential pressure sensors or blocked sensor lines
Damage from overheating during regenerations
Exhaust leaks near the filter

What to do

Have the differential pressure sensors, their lines and the condition of the filter checked. Don't look for shortcuts: if the filter is truly damaged it has to be repaired or replaced as the manufacturer requires. With the light on, avoid long trips and heavy loads.

How to read code P226D

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P226D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (6D) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P226D mean?

Particulate filter deteriorated or empty, bank 1. The control unit has found that the bank 1 particulate filter does not behave like an intact filter. It may be damaged, hollowed out inside or missing altogether. It usually detects this by comparing pressures or temperatures before and after the filter.

Can I keep driving with code P226D active?

With caution: limp mode possible, have it checked soon

Common causes — P226D

Broken or melted ceramic core inside the filter Filter removed or replaced with an unsuitable one Faulty differential pressure sensors or blocked sensor lines Damage from overheating during regenerations Exhaust leaks near the filter

How do you fix code P226D?

Have the differential pressure sensors, their lines and the condition of the filter checked. Don't look for shortcuts: if the filter is truly damaged it has to be repaired or replaced as the manufacturer requires. With the light on, avoid long trips and heavy loads.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes