Skip to content
Fault code dictionary (DTC)

P22C0 — Bank 2 Sensor 2 O2 sensor negative current circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer sees too low a voltage on the negative control current circuit of the downstream wide-band oxygen sensor on bank 2. This often means a grounded wire or a failed sensor. The reading is not reliable.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Usually no difference in driving
Possible other codes for the downstream sensor
Possible failure at an emissions inspection

Common causes

Wire grounded through damaged insulation
Wet or corroded connector
Failed sensor
Crushed or burnt wiring
Faulty engine computer, uncommon

What to do

Inspect the wiring of the bank 2 sensor behind the catalytic converter for worn wires or wires touching the body. It is not urgent, but get it checked as soon as you can.

How to read code P22C0

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P22C0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (C0) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P22C0 mean?

Bank 2 Sensor 2 O2 sensor negative current circuit low. The engine computer sees too low a voltage on the negative control current circuit of the downstream wide-band oxygen sensor on bank 2. This often means a grounded wire or a failed sensor. The reading is not reliable.

Can I keep driving with code P22C0 active?

With caution: limp mode possible, have it checked soon

Common causes — P22C0

Wire grounded through damaged insulation Wet or corroded connector Failed sensor Crushed or burnt wiring Faulty engine computer, uncommon

How do you fix code P22C0?

Inspect the wiring of the bank 2 sensor behind the catalytic converter for worn wires or wires touching the body. It is not urgent, but get it checked as soon as you can.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes