Skip to content
Fault code dictionary (DTC)

P22C7 — Turbo compressor outlet valve control circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer sees too high a voltage in the control circuit of the valve at the turbocharger compressor outlet. It may come from a wire touching a power supply or a valve fault. The valve may not work correctly.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Possible loss of power
Irregular turbo response
Reduced-power mode in some cases

Common causes

Wire touching a power supply
Failed solenoid valve
Damaged or corroded connector
Wiring damaged by heat
Faulty engine computer, uncommon

What to do

Check the connector and wires of the valve on the turbo for burn marks or wires in contact. If the car loses power, drive carefully and have it checked soon.

How to read code P22C7

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P22C7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (C7) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P22C7 mean?

Turbo compressor outlet valve control circuit high. The engine computer sees too high a voltage in the control circuit of the valve at the turbocharger compressor outlet. It may come from a wire touching a power supply or a valve fault. The valve may not work correctly.

Can I keep driving with code P22C7 active?

With caution: limp mode possible, have it checked soon

Common causes — P22C7

Wire touching a power supply Failed solenoid valve Damaged or corroded connector Wiring damaged by heat Faulty engine computer, uncommon

How do you fix code P22C7?

Check the connector and wires of the valve on the turbo for burn marks or wires in contact. If the car loses power, drive carefully and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes