P22DC — Cylinder 1 alternative fuel injector control circuit performance
| Meaning | The engine computer found that the control of the cylinder 1 alternative fuel injector is not behaving as expected, even though the circuit is not fully open or shorted. The control may be weak, slow or outside the expected values. The injector may meter the fuel poorly. |
| Family | Powertrain (P) |
Typical symptoms
Rough running or vibration
Loss of power
Mixture too rich or too lean
Hesitation when accelerating
Switch to the main fuel
Common causes
Electrical connection with abnormal resistance
Partly damaged wiring
Incorrect alternative fuel pressure
Computer or driver problem
What to do
How to read code P22DC
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P22DC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (DC) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P22DC mean?
Cylinder 1 alternative fuel injector control circuit performance. The engine computer found that the control of the cylinder 1 alternative fuel injector is not behaving as expected, even though the circuit is not fully open or shorted. The control may be weak, slow or outside the expected values. The injector may meter the fuel poorly.
Can I keep driving with code P22DC active?
With caution: limp mode possible, have it checked soon
Common causes — P22DC
Dirty or internally worn injector Electrical connection with abnormal resistance Partly damaged wiring Incorrect alternative fuel pressure Computer or driver problem
How do you fix code P22DC?
Have the injector, connections and alternative fuel pressure checked with a diagnostic scan. This isn't a fault to ignore for long, because combustion in that cylinder can get worse.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P22DB — Cylinder 1 alternative fuel injector control circu...
- Next code: P22DD — Cylinder 2 alternative fuel injector control circu...
Related codes
- P2200 — NOx sensor circuit fault, bank 1
- P2201 — NOx sensor circuit range/performance, bank 1
- P2202 — NOx sensor circuit low input, bank 1
- P2203 — NOx sensor circuit high input, bank 1
- P2204 — NOx sensor intermittent signal, bank 1
- P2205 — NOx sensor heater control circuit open, bank 1
- P2206 — NOx sensor heater control circuit low, bank 1
- P2207 — NOx sensor heater control circuit high, bank 1
- P2208 — NOx sensor heater sense circuit, bank 1
- P2209 — NOx sensor heater sense circuit out of range, bank 1
- P220A — Speed signal comparison implausible, Y3/6n2 and Y3/6n3
- P220B — Speed too high, Y3/6n2 or Y3/6n3