P236E — Cylinder 12 pressure variation too high
| Meaning | The control unit detected that combustion pressure in cylinder 12 varies more than allowed from one cycle to the next. This applies to engines with 12 or more cylinders and, on some makes, in-cylinder pressure sensors. The exact meaning depends on the manufacturer, and I have no reliable information on which component is involved for a specific make. |
| Family | Powertrain (P) |
Typical symptoms
Rough running or vibration
Loss of power
Unusual combustion noise
More exhaust smoke than normal
Common causes
Faulty cylinder 12 pressure sensor or damaged wiring
Compression problem in that cylinder
Worn spark plug or coil on cylinder 12
Deposits or leaking seals affecting combustion in that cylinder
What to do
How to read code P236E
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P236E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (6E) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P236E mean?
Cylinder 12 pressure variation too high. The control unit detected that combustion pressure in cylinder 12 varies more than allowed from one cycle to the next. This applies to engines with 12 or more cylinders and, on some makes, in-cylinder pressure sensors. The exact meaning depends on the manufacturer, and I have no reliable information on which component is involved for a specific make.
Can I keep driving with code P236E active?
With caution: limp mode possible, have it checked soon
Common causes — P236E
Cylinder 12 injector delivering unevenly Faulty cylinder 12 pressure sensor or damaged wiring Compression problem in that cylinder Worn spark plug or coil on cylinder 12 Deposits or leaking seals affecting combustion in that cylinder
How do you fix code P236E?
Have the cylinder 12 data read and compared with the other cylinders. Check the injector, spark plug and sensor wiring first. Don't keep driving for long with the engine running badly, as it can damage the catalytic converter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P236D — Cylinder 12: pressure variation too low
- Next code: P236F — Cylinder 12 combustion performance problem
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit