P2397 — Diesel intake air flow B position sensor range/performance
| Meaning | The engine computer found that the position reported by the second intake air valve sensor does not match the commanded or plausible position. The signal is present but not believable, so the valve may be moving poorly or the sensor may be reading wrongly. |
| Family | Powertrain (P) |
Typical symptoms
Lack of power
Slow or jerky response
Black or white exhaust smoke
Engine in limp mode
Common causes
Position sensor reading inaccurately
Weak actuator or valve motor
Worn linkage or mechanism
Wiring with abnormal resistance
What to do
How to read code P2397
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2397 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (97) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2397 mean?
Diesel intake air flow B position sensor range/performance. The engine computer found that the position reported by the second intake air valve sensor does not match the commanded or plausible position. The signal is present but not believable, so the valve may be moving poorly or the sensor may be reading wrongly.
Can I keep driving with code P2397 active?
With caution: limp mode possible, have it checked soon
Common causes — P2397
Valve dirty or seized with soot Position sensor reading inaccurately Weak actuator or valve motor Worn linkage or mechanism Wiring with abnormal resistance
How do you fix code P2397?
First have someone check that the valve moves freely and that the sensor value follows the command. Don't ignore it for long, because air management affects smoke and the particulate filter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2396 — Diesel intake air flow B position sensor circuit f...
- Next code: P2398 — Diesel intake air flow B position sensor circuit l...
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit