P23C2 — NOx sensor 3 bank 1: delayed response from high to low
| Meaning | NOx (nitrogen oxides) sensor number 3 reacts late when the measured value should drop. The control unit sees a delay beyond the acceptable limit. What sensor number 3 means exactly depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Emissions system warning message
Possible power limitation
Irregular additive dosing
Often no driving symptom
Common causes
Deposits on the sensing element
Exhaust leak near the sensor
Wiring or connector with poor contact
Fault in the sensor control module
What to do
How to read code P23C2
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P23C2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (C2) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P23C2 mean?
NOx sensor 3 bank 1: delayed response from high to low. NOx (nitrogen oxides) sensor number 3 reacts late when the measured value should drop. The control unit sees a delay beyond the acceptable limit. What sensor number 3 means exactly depends on the manufacturer.
Can I keep driving with code P23C2 active?
With caution: limp mode possible, have it checked soon
Common causes — P23C2
Aged NOx sensor Deposits on the sensing element Exhaust leak near the sensor Wiring or connector with poor contact Fault in the sensor control module
How do you fix code P23C2?
Have the sensor checked with live data and verify exhaust sealing and connectors. It is best to act without too much delay.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P23C1 — NOx sensor 3 bank 1: sensing element fault
- Next code: P23C3 — Coolant bypass valve C: position sensor circuit
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit