P23C8 — Fuel heater control module: power control circuit low
| Meaning | The voltage in the power circuit of the fuel heater control module is lower than expected. It may come from a short to ground or weak supply. Details depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Hard starting in cold weather
Irregular running when cold
Loss of power at low temperatures
No symptoms in mild weather
Common causes
Fuse or relay problem
Damaged or wet connector
Faulty heater module
Circuit fault in the control unit
What to do
How to read code P23C8
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P23C8 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (C8) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P23C8 mean?
Fuel heater control module: power control circuit low. The voltage in the power circuit of the fuel heater control module is lower than expected. It may come from a short to ground or weak supply. Details depend on the manufacturer.
Can I keep driving with code P23C8 active?
With caution: limp mode possible, have it checked soon
Common causes — P23C8
Wire shorted to ground Fuse or relay problem Damaged or wet connector Faulty heater module Circuit fault in the control unit
How do you fix code P23C8?
Have the wiring, fuse and connectors of the module checked and the voltage measured. In cold weather it is best to act early.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P23C7 — Fuel heater control module: power control circuit...
- Next code: P23C9 — Fuel heater control module: power control circuit...
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit