Skip to content
Fault code dictionary (DTC)

P23C7 — Fuel heater control module: power control circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a break in the circuit that powers the fuel heater control module. The fuel heater mainly matters in cold weather, to prevent fuel problems. Which vehicles have it and how it is fitted depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Hard starting in cold weather
Rough running when cold
Loss of power at low temperatures
No symptoms in mild weather

Common causes

Blown fuse or relay
Broken wire or disconnected connector
Faulty heater module
Corroded contacts
Circuit fault in the control unit

What to do

Check the fuse, relay and module connectors first. In cold weather do not put it off, since the fuel can cause starting problems.

How to read code P23C7

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P23C7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (C7) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P23C7 mean?

Fuel heater control module: power control circuit open. The control unit detected a break in the circuit that powers the fuel heater control module. The fuel heater mainly matters in cold weather, to prevent fuel problems. Which vehicles have it and how it is fitted depends on the manufacturer.

Can I keep driving with code P23C7 active?

With caution: limp mode possible, have it checked soon

Common causes — P23C7

Blown fuse or relay Broken wire or disconnected connector Faulty heater module Corroded contacts Circuit fault in the control unit

How do you fix code P23C7?

Check the fuse, relay and module connectors first. In cold weather do not put it off, since the fuel can cause starting problems.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes