P244F — Exhaust Temperature Too High For Particulate Filter Regeneration Bank 2
| Meaning | Exhaust Temperature Too High For Particulate Filter Regeneration Bank 2. |
| Family | Powertrain (P) |
How to read code P244F
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P244F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (4F) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P244F mean?
Exhaust Temperature Too High For Particulate Filter Regeneration Bank 2.
Can I keep driving with code P244F active?
With caution: limp mode possible, have it checked soon
How do you fix code P244F?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P244E — Exhaust Temperature Too Low For Particulate Filter...
- Next code: P2450 — EVAP System Switching Valve Performance/Stuck Open
Related codes
- P2400 — Evaporative Emission System Leak Detection Pump Control Circ...
- P2401 — Evaporative Emission System Leak Detection Pump Control Circ...
- P2402 — Evaporative Emission System Leak Detection Pump Control Circ...
- P2403 — Evaporative Emission System Leak Detection Pump Sense Circui...
- P2404 — Evaporative Emission System Leak Detection Pump Sense Circui...
- P2405 — Evaporative Emission System Leak Detection Pump Sense Circui...
- P2406 — Evaporative Emission System Leak Detection Pump Sense Circui...
- P2407 — Evaporative Emission System Leak Detection Pump Sense Circui...
- P2408 — Fuel Cap Sensor/Switch Circuit
- P2409 — Fuel Cap Sensor/Switch Circuit Range/Performance
- P240A — The engine speed of the engine system is implausible.
- P240B — The engine speed sent from the engine control unit via the C...