Skip to content
Fault code dictionary (DTC)

P246C — Diesel Particulate Filter Restriction - Forced Limitation

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningYour engine computer has detected that the diesel particulate filter is too full of soot, and it has activated a power restriction to protect the exhaust system. This means the soot trap is blocked and the car cannot complete its normal cleaning cycle on its own.
FamilyPowertrain (P)

Typical symptoms

The engine feels sluggish and lacks normal power
A warning message or check engine light is illuminated on the dashboard
The vehicle may enter a low-power safety mode

Common causes

Frequent short trips that prevent the exhaust from getting hot enough to clean itself
A failed exhaust temperature sensor or pressure sensor giving false readings
Faulty fuel injectors or EGR valve causing excessive soot buildup

What to do

You should bring the car in soon to check the particulate filter and its sensors before the blockage becomes permanent. Avoid continuous driving under heavy load until a technician diagnoses the root cause of the soot buildup.

How to read code P246C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P246C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (6C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P246C mean?

Diesel Particulate Filter Restriction - Forced Limitation. Your engine computer has detected that the diesel particulate filter is too full of soot, and it has activated a power restriction to protect the exhaust system. This means the soot trap is blocked and the car cannot complete its normal cleaning cycle on its own.

Can I keep driving with code P246C active?

With caution: limp mode possible, have it checked soon

Common causes — P246C

Frequent short trips that prevent the exhaust from getting hot enough to clean itself A failed exhaust temperature sensor or pressure sensor giving false readings Faulty fuel injectors or EGR valve causing excessive soot buildup

How do you fix code P246C?

You should bring the car in soon to check the particulate filter and its sensors before the blockage becomes permanent. Avoid continuous driving under heavy load until a technician diagnoses the root cause of the soot buildup.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes