Skip to content
Fault code dictionary (DTC)

P2522 — A/C request "B" circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine control unit monitors the second signal the climate system uses to ask for the compressor to switch on (request "B"). It found a value that does not match what it expects. The code describes a general circuit problem without saying whether the signal is too low or too high. Which circuit "B" is exactly depends on the car.
FamilyPowertrain (P)

Typical symptoms

The A/C will not turn on, or behaves erratically
The compressor does not start when requested
Unstable idle when the A/C should be engaging
Check engine light on

Common causes

Damaged connector or signal wire
Faulty A/C control or climate control unit
Poor grounds or supply in the circuit
Faulty sensor or component connected to the circuit
Engine control unit fault, which is rare

What to do

First check the connectors and wires of the circuit and make sure the A/C control works. It is not a safety issue, but the A/C may not work while the fault remains.

How to read code P2522

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2522 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (22) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2522 mean?

A/C request "B" circuit fault. The engine control unit monitors the second signal the climate system uses to ask for the compressor to switch on (request "B"). It found a value that does not match what it expects. The code describes a general circuit problem without saying whether the signal is too low or too high. Which circuit "B" is exactly depends on the car.

Can I keep driving with code P2522 active?

With caution: limp mode possible, have it checked soon

Common causes — P2522

Damaged connector or signal wire Faulty A/C control or climate control unit Poor grounds or supply in the circuit Faulty sensor or component connected to the circuit Engine control unit fault, which is rare

How do you fix code P2522?

First check the connectors and wires of the circuit and make sure the A/C control works. It is not a safety issue, but the A/C may not work while the fault remains.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes