Skip to content
Fault code dictionary (DTC)

P2523 — A/C request "B" circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine control unit read a lower than normal voltage in the second A/C request circuit (request "B"). It usually indicates a wire touching ground or a broken contact. Which circuit "B" is exactly depends on the car.
FamilyPowertrain (P)

Typical symptoms

The A/C will not turn on
The compressor does not start
Check engine light on
The fans do not react to the A/C request

Common causes

Signal wire touching ground
Corroded or loose connector
Faulty A/C control or climate control unit
Faulty component connected to the circuit
Engine control unit fault, which is rare

What to do

First check the wires and connectors of the circuit, looking for chafed spots or contact with the bodywork. It is not a safety issue, but the A/C may stay out of service.

How to read code P2523

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2523 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (23) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2523 mean?

A/C request "B" circuit low. The engine control unit read a lower than normal voltage in the second A/C request circuit (request "B"). It usually indicates a wire touching ground or a broken contact. Which circuit "B" is exactly depends on the car.

Can I keep driving with code P2523 active?

With caution: limp mode possible, have it checked soon

Common causes — P2523

Signal wire touching ground Corroded or loose connector Faulty A/C control or climate control unit Faulty component connected to the circuit Engine control unit fault, which is rare

How do you fix code P2523?

First check the wires and connectors of the circuit, looking for chafed spots or contact with the bodywork. It is not a safety issue, but the A/C may stay out of service.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes