Skip to content
Fault code dictionary (DTC)

P256F — A/C request B signal out of range or implausible

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine control unit receives an A/C compressor request signal (circuit B) from the climate system that does not match what is expected. In practice, engine and A/C are not agreeing on when the compressor should switch on. Which circuit is exactly 'B' depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
A/C that does not cool or cuts out at times
Rough idle when the A/C turns on
Compressor cycling on and off often

Common causes

Faulty A/C pressure switch or sensor
A/C request wiring or connector with poor contact
Low refrigerant or abnormal pressure
Faulty climate control module
Engine control unit problem (rare)

What to do

First check whether the A/C works normally, and inspect the pressure switch, connectors and the compressor request wiring. You can drive, but have the system checked if the idle becomes rough.

How to read code P256F

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P256F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (6F) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P256F mean?

A/C request B signal out of range or implausible. The engine control unit receives an A/C compressor request signal (circuit B) from the climate system that does not match what is expected. In practice, engine and A/C are not agreeing on when the compressor should switch on. Which circuit is exactly 'B' depends on the manufacturer.

Can I keep driving with code P256F active?

With caution: limp mode possible, have it checked soon

Common causes — P256F

Faulty A/C pressure switch or sensor A/C request wiring or connector with poor contact Low refrigerant or abnormal pressure Faulty climate control module Engine control unit problem (rare)

How do you fix code P256F?

First check whether the A/C works normally, and inspect the pressure switch, connectors and the compressor request wiring. You can drive, but have the system checked if the idle becomes rough.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes